Operating a lithium battery electric locomotive requires careful attention to power-on and power-off procedures. Proper operation ensures safety, extends battery life, and improves performance.
Power-On Precautions
1. Press and hold the green button for 3 seconds
To start the locomotive, press and hold the green button for three seconds. This safety design prevents accidental startup and ensures intentional operation.
2. Check the battery pack status
Before starting, inspect the battery pack. Make sure the charge level is sufficient for your working shift. Low voltage can cause power loss during operation.
3. Prevent plug damage
Connect the plug between the locomotive and the battery pack only when the controller is at zero. Then turn on the power. This step prevents plug overheating or burning.
4. Inspect gauges and indicators
After powering on, check the display panel and indicator lights. Any warning signals should be handled immediately before operation begins.
Power-Off Precautions
1. Press and hold the green button for 5 seconds
To shut down the locomotive, press and hold the green button for five seconds. This ensures that the vehicle stops safely and completely.
2. Disconnect the battery pack
After shutdown, unplug the connector between the locomotive and the battery pack. Always ensure full disconnection to prevent current leakage.
3. Maintain the battery pack
If unused for more than two hours, the lithium battery pack will automatically shut down to save energy. This feature helps conserve battery life, but remember to restart it when needed.
Safe Operation and Maintenance
Following these steps ensures the lithium battery electric locomotive operates safely and efficiently. Always handle the power switch carefully, inspect the battery status regularly, and disconnect properly after use. By doing so, operators can extend equipment life, maintain performance, and ensure safer underground transport.